RocketDivision.Com Forum IndexRocketDivision.Com
RDS - software that rocks!
 
 FAQFAQ             
        

Burning MDS file to DVD...

 
      RocketDivision.Com Forum Index -> StarBurn SDK
View previous topic :: View next topic  
AuthorMessage
xsoft



Joined: 28 Oct 2004
Posts: 2

PostPosted: Thu Feb 03, 2005 10:08 pm    Post subject: Burning MDS file to DVD...

I was just playing around with the samples and used GradDisc to build an MDS for a DVD movie.

Then I tried to burn it using SessionAtOnceRawRawPW, but it did not work. I suspect this might be because code is missing to burn a protected DVD.

Is this the expected behavior?
Back to top
anton (staff)
Site Admin


Joined: 18 Jun 2004
Posts: 1459
Location: Ukraine

PostPosted: Fri Feb 04, 2005 1:59 am    Post subject: Re: Burning MDS file to DVD...

1) DVD media cannot be recorded in RAW Session-At-Once mode. Track-At-Once samples must be used with DVD media inserted (OK, DVDs burn in Disc-At-Once and Packet-At-Once modes, but since sector size is 2048 bytes from the programmers point of view recording process is closer to what TAO and not RAW mode does).

2) StarBurn creates encrypted images of DVDs. They cannot be recorded on home DVD burners. If you need to have code which decrypts DVD and records CSS-less image to DVD media please contact us in private. Of course such a code is illegal in most of the countries and we cannot keep it as part of the SDK.

xsoft wrote:
I was just playing around with the samples and used GradDisc to build an MDS for a DVD movie.

Then I tried to burn it using SessionAtOnceRawRawPW, but it did not work. I suspect this might be because code is missing to burn a protected DVD.

Is this the expected behavior?

_________________
Regards,
Anton Kolomyeytsev

Rocket Division Software
Back to top
      RocketDivision.Com Forum Index -> StarBurn SDK
Page 1 of 1