RocketDivision.Com Forum IndexRocketDivision.Com
RDS - software that rocks!
 
 FAQFAQ             
        

Should I SetSpeed before Get###Information

 
      RocketDivision.Com Forum Index -> StarBurn SDK
View previous topic :: View next topic  
AuthorMessage
Acidtech



Joined: 02 Jun 2005
Posts: 51

PostPosted: Mon Feb 13, 2006 11:30 pm    Post subject: Should I SetSpeed before Get###Information

Should I SetSpeed before I use GetDisc/TOC/TrackInformation commands? Basically I'm asking if the SetSpeed has any effect on these commands and if so should I set 1x when using them for best read and then do anothber SetSpeed with my user selected speed(ie 2x,4x,8x...48x etc). I'm using the GetTOCInformation to find out if the inserted disc is a CD or DVD which will also effect what user selected speed I set for the actual rip/burn.

Nathan
Back to top
anton (staff)



Joined: 18 Jun 2004
Posts: 1279
Location: Ukraine

PostPosted: Tue Feb 14, 2006 10:17 am    Post subject: Re: Should I SetSpeed before Get###Information

Well... The difference would be very small or even non-existing. So I don't think you need to change anything Smile

Acidtech wrote:
Should I SetSpeed before I use GetDisc/TOC/TrackInformation commands? Basically I'm asking if the SetSpeed has any effect on these commands and if so should I set 1x when using them for best read and then do anothber SetSpeed with my user selected speed(ie 2x,4x,8x...48x etc). I'm using the GetTOCInformation to find out if the inserted disc is a CD or DVD which will also effect what user selected speed I set for the actual rip/burn.

Nathan

_________________
Regards,
Anton Kolomyeytsev

Rocket Division Software
Back to top
Acidtech



Joined: 02 Jun 2005
Posts: 51

PostPosted: Tue Feb 14, 2006 5:35 pm    Post subject:

Thanks. Thats what I thought.
Back to top
anton (staff)



Joined: 18 Jun 2004
Posts: 1279
Location: Ukraine

PostPosted: Tue Feb 14, 2006 9:59 pm    Post subject:

Good Smile

Acidtech wrote:
Thanks. Thats what I thought.

_________________
Regards,
Anton Kolomyeytsev

Rocket Division Software
Back to top
      RocketDivision.Com Forum Index -> StarBurn SDK
Page 1 of 1