RocketDivision.Com Forum IndexRocketDivision.Com
RDS - software that rocks!
 
 FAQFAQ             
        

Getting device address when using FindDeviceEx example

 
      RocketDivision.Com Forum Index -> StarBurn SDK
View previous topic :: View next topic  
AuthorMessage
Acidtech



Joined: 02 Jun 2005
Posts: 69

PostPosted: Wed May 31, 2006 9:16 pm    Post subject: Getting device address when using FindDeviceEx example

I'm using the FindDeviceEx method to find/create my burner objects instead of using the FindDevice callback. Since I'm not using the callback I don't get the device address. For example if I wanted to set or get the timeout of the device I could not do that without having the device address. I don't need it just yet but I may need it at some time in the future so how do I get the device address?

One other thing slightly related. Does GetDeviceNameByDeviceAddress return the volume/path(ie. G:\)?
Back to top
anton (staff)
Site Admin


Joined: 18 Jun 2004
Posts: 1459
Location: Ukraine

PostPosted: Thu Jun 01, 2006 2:38 pm    Post subject: Re: Getting device address when using FindDeviceEx example

You cannot set timeout as it's ASPI-relative feature. Also at least USB/FireWire devices don't have SCSI address at all. Our ASPI layer simulates them and they are application wide only (not system wide).

Acidtech wrote:
I'm using the FindDeviceEx method to find/create my burner objects instead of using the FindDevice callback. Since I'm not using the callback I don't get the device address. For example if I wanted to set or get the timeout of the device I could not do that without having the device address. I don't need it just yet but I may need it at some time in the future so how do I get the device address?

One other thing slightly related. Does GetDeviceNameByDeviceAddress return the volume/path(ie. G:\)?

_________________
Regards,
Anton Kolomyeytsev

Rocket Division Software
Back to top
      RocketDivision.Com Forum Index -> StarBurn SDK
Page 1 of 1